Forge Tools Blog
Practical quality and industrial-engineering articles — statistical process control, FMEA, 8D problem solving, design of experiments, standard work, time study and scheduling — each with an example you can reproduce in Forge Tools.
Articles on the methods quality and manufacturing engineers use every day — what each one is for, how it is calculated, where it goes wrong, and which standard or textbook it comes from. Every article ends with the same example worked in Forge Tools, desktop apps that run on your own PC, offline.
Articles
- Who decided this rating? Recording where an FMEA's severity, occurrence and detection came from 5 min read
An FMEA reviewer can only judge ratings they can tell apart. Forge FMEA now records whether each severity, occurrence and detection was entered, accepted from an AI suggestion or corrected, marks AI values nobody has touched, and names the approved revision in every report. Forge SOP does the same for accepted AI draft steps.
- Three dispatching rules that come with a proof: SPT, WSPT and EDD, and where the proof stops 6 min read
Shortest processing time, weighted shortest processing time and earliest due date are each provably optimal for one objective on one machine. A five-job example checked against all 120 orders shows what each one wins and what it gives up, and why a sorting rule stops being a theorem the moment a second machine appears.
- When a p chart flags half the days: overdispersion and Laney's p′ chart 6 min read
With large subgroups, a p chart's binomial limits get so narrow that ordinary day-to-day variation lands outside them. What overdispersion is, how Laney's p′ chart measures it with σz, a worked example where the p chart flags 10 of 20 days and the p′ chart flags one, and what σz below 1 means.
- RULA, REBA and OWAS from a video: what the camera measures, and what you still have to tell it 6 min read
Forge Lens 0.21 scores RULA, REBA and OWAS from a work video on your own PC, using a 17-point body pose model. Which inputs come from the video and which you set yourself, what happens when the worker is out of frame, and what published studies say about how far 2D video scores can be trusted.
- Action Priority vs RPN: why the AIAG-VDA FMEA stopped multiplying S, O and D 5 min read
The 2019 AIAG-VDA FMEA Handbook replaced the Risk Priority Number with Action Priority (High / Medium / Low). What is wrong with S×O×D, what AP does instead, what the 2020 errata changed, and failure modes with the same RPN of 72 and different priorities.
- Cpk vs Ppk: what each index measures, and what the gap between them tells you 5 min read
Cp and Cpk use the short-term (within-subgroup) spread; Pp and Ppk use the overall spread of all the data. How each is calculated, why they differ, which one a PPAP or a customer asks for, and a worked example where Cpk is 1.56 and Ppk is 0.89.
By topic
- Forge SPC Control charts, process capability · SPC guides
- Forge FMEA FMEA (AIAG-VDA), control plans
- Forge 8D 8D problem solving
- Forge DOE Design of experiments
- Forge SOP Standard work, work instructions
- Forge Lens Time and motion study
- Forge Plan Production scheduling